Bissell Deep Clean Premier Pet is a powerful carpet cleaner designed for pet owners. It can remove even the toughest pet stains and odors from your carpets, leaving them fresh and clean. Here is a step-by-step guide on how to use this powerful cleaner to get the best results.
Step 1: Prepare the Area
Before using the Bissell Deep Clean Premier Pet, vacuum the area thoroughly to remove loose debris and pet hair. This will make it easier for the cleaner to reach deep down into the carpet fibers and remove the stains and odors.
Step 2: Fill the Tank
Remove the clean water tank from the cleaner and fill it with hot water. Do not use boiling water as it can damage the cleaner. Then, add the cleaning solution as per instructions on the cleaner.
Step 3: Select Your Settings
The Bissell Deep Clean Premiere has three settings: high-traffic cleaning, deep-cleaning, and spot-cleaning modes. Select which mode you want for your upcoming project before getting started to achieve the best results possible!
Step 4: Pre-Treat Heavy Stains
For any heavy pet stains or areas stuck on deposits from food or other debris, you may need to pre-treat them before running them through the Bissell Deep Clean Premier Pet machine. You can do this by applying an appropriate pre-treatment formula directly onto these problem spots and giving it approximately 15 minutes to soak in and work its magic!
Step 5: Start Cleaning
Now you’re ready to start cleaning! Push forward with your Bissell Deep Clean Premier Pet machine until it reaches the end of a section; then pull back; repeat until the entire area has been cleaned thoroughly – make sure not to leave out corners or edges as these can easily be missed -and keep an eye on potential problems around furniture legs or corners where dirt accumulates more easily if overlooked!
And don’t forget: while vacuuming pet hair may not always remove deep-down odor, this machine’s deeper cleaning power will find those odors and leave behind refreshing scents that last until their next serious vacuuming session occurs!
Step 6: Apply the Cleaner
Start by using the cleaner in an inconspicuous area to test for colorfastness. Once you are satisfied that your carpet is colorfast, use the cleaner on the entire carpet. Work in small sections and use the hose to apply the cleaning solution. Use the cleaner’s brush to work the solution into the carpet fibers.
Step 7: Extract the Water
After applying the cleaning solution, use the cleaner’s hose to extract the water and stains from the carpet. The cleaner will have a separate tank for dirty water, so empty it as needed.
Step 8: Dry the Carpet
Once you have extracted the water, use a fan or open a window to help the carpet dry faster. Avoid walking on the carpet while it is still wet to prevent damage.
Following these steps, you can effectively use the Bissell Deep Clean Premier Pet to remove even the toughest pet stains and odors from your carpets. Always read the instruction manual with the cleaner to ensure you are using it correctly and safely.